2
2.3
Turning on the main power and the auxiliary power
This machine has two power controls: the main power switch and the [Pow-
er] (auxiliary power) key.
To turn on the machine
The main power switch turns on/off all functions of the machine. Normally,
the main power switch is turned on.
The [Power] (auxiliary power) key turns on/off machine operations, for exam-
ple, for copying, printing or scanning. When the [Power] (auxiliary power) key
is turned off, the machine enters a state where it conserves energy.
1
Open the machine's front door, and
then set the main power switch to "n".
2
Close the front door.
3
Press the [Power] (auxiliary power)
button.
Check that the touch panel is turned
on.
!
Detail
When the control panel is turned on by pressing the [Power] (auxiliary
power) button, the indicator on the [Start] key lights up in orange, and a
screen indicating that the machine is starting up appears.
After a few seconds, the message "Now warming up. Ready to scan." ap-
pears on the touch panel, and the indicator on the [Start] key lights up in
green, indicating that a job can now be queued.
2-26
Before making copies
d-Color MF25