Olivetti d-Color MF25 User Manual page 511

Utility
Parameter
Image Stabilization
Color Reg-
istration
Adjust
Gradation
Adjust-
ment
Scanner
Adjust-
ment
d-Color MF25
Description
Perform an image stabilization if the im-
age is incorrect, even after the gradation
levels have been adjusted.
• Image Stabilization Only:
Perform normal image stabilization.
• Initialize + Image Stabilization:
Select when a good result was not
achieved after "Image Stabilization
Only" was selected.
Color Reg- Adjust the color registration if color shifts
istration can be seen in the print result.
Adjust
(Yellow)
Color Reg-
istration
Adjust
(Magenta)
Color Reg-
istration
Adjust (Cy-
an)
Copy Adjust the gradation if there are changes
in the color gradations of the print image.
The adjustment is made with stress on
increasing the number of images stored
in the memory.
Printer Adjust the gradation if there are changes
(Gradation) in the color gradations of the print image.
The adjustment is made with stress on
the gradations in images.
Printer Adjust the gradation if there are changes
(Resolu- in the color gradations of the print image.
tion) The adjustment is made with stress on
the reproducibility of text and lines.
Leading The starting scanning position (document feed direction) of the doc-
Edge Ad- ument can be adjusted. For details on making this adjustment, con-
justment tact your technical representative.
Centering The starting scanning position (transverse document feed direction)
of the document can be adjusted. For details on making this adjust-
ment, contact your technical representative.
Horizontal If the copy image is distorted (stretched or compressed), the zoom
Adjust- ratio in the transverse document feed direction for the scanner can
ment be adjusted. For details on making this adjustment, contact your
technical representative.
Vertical If the copy image is distorted (stretched or compressed), the zoom
Adjust- ratio in the document feed direction for the scanner can be adjusted.
ment For details on making this adjustment, contact your technical repre-
sentative.
12
Default Setting
–
–
–
–
–
–
–
12-37