Replacing toner cartridges and staples and emptying waste containers
13
Swing open the shutter of the staple
cartridge.
14
Pull out toward you the two staples
jammed at the end of the staple car-
tridge.
What happens if both staples are
?
not removed?
% Stapling cannot continue correct-
ly.
15
Return the shutter of the staple cartridge to its original position.
16
Insert the staple cartridge holder,
making sure the tabs on the holder
slide along the rails in the compart-
ment.
17
Insert the staple cartridge holder until
it locks into place.
–
Check that the staple cartridge
holder is securely installed.
d-Color MF25
9
9-23