Olivetti d-Color MF25 User Manual page 210

3
Finishing Setting
Staple
Punch
The following procedures describe how to select Finishing settings.
Reminder
The Staple settings are available only if optional finisher FS-603 or finish-
er FS-501 is installed.
The Punch settings are available only if punch kit PK-501 is installed on
optional finisher FS-603.
3-70
Description
Select one of these settings to bind the copies with a staple in
the corner or with two staples.
Select this setting to punch holes (4 holes) in the copies for fil-
ing them.
Basic copy operations
d-Color MF25