Table of Contents
Advertisement
12
Parameter
ADF Ad-
justment
!
Detail
For the procedure on adjusting the printer, refer to "Adjusting the printer"
on page 12-48.
For the procedure on adjusting the finisher, refer to "Adjusting the finish-
er" on page 12-56.
For the procedure on adjusting the color registration, refer to "Adjusting
the color registration for yellow, magenta and cyan" on page 12-60.
For the procedure on adjusting the gradation levels, refer to "Adjusting
the gradation levels" on page 12-63.
For details on displaying [Erase Leading Edge], contact your technical
representative.
For details on displaying [Scanner Adjustment] and [ADF Adjustment],
contact your technical representative.
12-38
Description
Centering
If the center position cannot be automatically adjusted in the trans-
verse document feed direction, it can be adjusted manually. For de-
tails on making this adjustment, contact your technical
representative.
Original
If the scanning position cannot be automatically adjusted in the doc-
Stop Posi-
ument feed direction, it can be adjusted manually. For details on
tion
making this adjustment, contact your technical representative.
Centering
The center position in the transverse document feed direction can be
Auto Ad-
adjusted automatically. For details on making this adjustment, con-
justment
tact your technical representative.
Auto Adj.
The scanning position in the document feed direction can be adjust-
of Stop
ed automatically. For details on making this adjustment, contact
Position
your technical representative.
Utility
Default Setting
d-Color MF25
Advertisement
Table of Contents
Troubleshooting
