Olivetti d-Color MF25 User Manual page 577

Appendix
C
Change Tray Settings
Touch this button to specify a paper size not loaded in a paper tray or to copy
on paper other than plain paper.
Chapters
Set this function to specify chapter title pages that must be printed on the
front side of the paper when printing double-sided copies.
Color Balance
Set this parameter to adjust the balance in the concentrations of cyan (C),
magenta (M), yellow (Y) and black (K). Each color can be finely adjusted to
any of 19 levels between –3 and +3.
Combine Originals
Select a setting to arrange reduced copies of multiple document pages on a
single copy page. The settings for the number of pages that can be com-
bined are "2 in 1", "4 in 1" and "8 in 1".
Contrast
Set this parameter to adjust the contrast between light and dark.
Copy Density
Set this parameter to finely adjust the copy density to any of 19 levels be-
tween –3 and +3.
Cover Mode
Set this function to add paper from the specified paper tray to the copies as
a cover page.
D
Density
Select a setting to adjust the density of the print image to one of nine levels.
Duplex 2nd-Side
Select this setting to switch the image transfer current of this machine when
copying on paper that has already been printed on one side.
E
Edit Color
Set the functions and parameters that are available to adjust the print image
as desired
F
Fold & Staple
Set this function to fold the copies in half and staple them together at the
center.
Finishing
Select from the settings that are available for sorting and finishing copies
when they are fed into the copy exit tray.
d-Color MF25
13
13-7