Utility
–
Be sure to load the paper in the orientation shown on the screen.
8
Place into the 1st tray 10 or more sheets of blank paper of the same
size as the printed test pattern page.
9
Close the original cover, or the ADF if it is installed.
10
Press the [Start] key.
The printed test pattern is scanned.
When the test pattern is scanned, the gradation levels are automatical-
ly adjusted based on the scanned image.
11
Repeat steps 5 through 9 three times.
12
Touch [Close].
d-Color MF25
12
12-65