Utility
6
Compare the width of the left pages
of the copy sample with the width of
the right pages to check for the cent-
er of the paper.
–
If the folding position is too far to
the left of the center of the paper,
touch [+] to increase the adjust-
ment (between 1 mm and 7 mm).
–
If the folding position is too far to
the right of the center of the pa-
per, touch [–] to reduce the ad-
justment (between –1 mm and –7
mm).
–
To scroll through the values
quickly, touch [+] or [–] continu-
ously.
7
Touch [OK].
–
To cancel changes to the settings, touch [Cancel].
The half-fold position is adjusted.
If the folding position was at the center of the paper in step 6, this com-
pletes the procedure.
8
Use the "Fold & Staple" function to print a another sample copy.
9
Check the print result.
–
Check that the folding position is adjusted to the center of the pa-
per.
–
If more adjustment is necessary, repeat steps 6 and 8.
d-Color MF25
12
12-59