15. Doors
Attach Doors to cart front with 4 GG screws for each Hinge as shown.
If the doors are not aligned correctly after assembly, they can be adjusted as follow:
Screw#1 is used to adjust the gap between doors and align the door to the cart side panel (see pic 1);
Screw#2 is used to adjust the gap between doors and cart side panel (see pic 2)
16. Grids, Diffusers, Racks and Knobs
- Place diffusers within the support tabs.
- Install main burner cooking grids with square lifting hole to front.
- Install warming rack into four support holes as shown.
- Push main burner and side burner control knobs onto valve stems.
28
Pic1
Pic2