Kenmore 139.01566310 Use & Care Manual page 26

11. Side Burner Tube and Valve
- Remove tie wraps from side burner grid, and remove grid from side burner.
- Insert side burner valve control stem though side burner control panel. Attach bezel to control panel and
valve control with 2 FF screws.
- Attach the side burner nozzle support to the underside of the burner bowl with 2 DD screws and 2 HH
washers as shown.
- Run the side burner ignition wire over the side panel edge and into the cart
- Replace side burner grid.
12. Ignition Box
Remove the cap and nut from the ignition box. Secure ignition box to the side panel with the nut. Then
reassemble the cap to the box.
26