ASSEMBLY INSTRUCTIONS
IMPORTANT: Assemble the grill on a flat level surface. During assembly, check the parts and hardware for
correct identification against the list and diagrams on pages 13–18.
1. Casters
Attach each locking castor to the back of the bottom panel with 4 AA screws and 4 BB and 4 CC washers as
shown below. Use same hardware types and quantities to attach each non-locking caster to front of panel.
After attaching all casters, turn bottom panel over.
2. Tank Tray
- Attach the tank tray to the bottom panel with 8 DD screws. Attach the door stop pole to the bottom panel
with 1 JJ screw.
21