Call Pickup - Yealink VP530 User Manual

User Guide for VP530 IP Video Phone
To use the call park feature:
1. User on phone A places a call to phone B.
2. User on phone A wants to take the call in a conference room for privacy, then taps
the call park key on phone A.
3. (Optional.)The SIP Server sends the first available call park extension (e.g.150),
which will appear on the LCD screen of phone A.
4. The user on phone A walks to an available conference room where the phone is
designated as phone C. The user dials the call park retrieve code (or the call park
extension (e.g. 150)) to retrieve the parked call.
The system establishes call between phone B and C.
Note The call park feature code and call park extension are predefined on the system server.
Contact your system administrator for more information.
If the parked call is not retrieved within a period of time assigned by the system, the
phone performing call park feature will receive call back.
You can tap a pickup key to answer someone else's incoming call on the phone. The
VP530 IP video phone supports the directed call pickup and group call pickup features.
Directed call pickup is used for picking up a call that is ringing at a specific phone
number. Group call pickup is used for picking up a call that is ringing at any phone
number in the group. The pickup group should be predefined, contact your system
administrator for more information.
Note
If there are many incoming calls at the same time, tap the pickup key on the phone will
pick up the call that rings first.
Directed Call Pickup
To configure a pickup key via phone user interface:
1. Tap
2. Tap the desired DSS key for one second.
3. Tap the pull-down list of Type and then select Key Event.
4. Tap the pull-down list of Key Type and then select Pick Up.
5. Tap the pull-down list of Account ID and then select the desired line.
62
.