Call Park - Yealink VP530 User Manual

You can use call park feature to place a call on hold, and then retrieve the call from
another phone in the system (for example, a phone in another office or conference
room). You can park an active call by tapping the call park key on the phone. If the call
is parked successfully, the response is either a voice prompt confirming that the call is
parked, or a visible indication on the LCD screen. When the call is parked successfully,
someone can retrieve the parked call on another phone.
Note
Call Park feature is not available on all servers. Contact your system administrator for
more information.
To configure a call park key via phone user interface:
1. Tap
2. Tap the desired DSS key for one second.
3. Tap the pull-down list of Type and then select Key Event.
4. Tap the pull-down list of Key Type and then select Call Park.
5. Tap the pull-down list of Account ID and then select the desired line.
6. Enter the key label in the Label field or leave it blank.
7. Enter the call park feature code (contact your system administrator for it) in the
Value field.
8. Press the Save soft key to accept the change or the Back soft key to cancel.
9. Tap to return to the idle screen.
You can also configure a call park key via web user interface at the path DSS
Key->Memory Key (or Line Key).
.
Basic Call Features
61