Phone Initialization; Phone Status; Basic Network Settings - Yealink VP530 User Manual

After your phone has been powered up, the system boots up and performs the
following steps:
Automatic Phone Initialization
The phone finishes the initialization process by loading the saved configuration. The
phone LCD screen will display as following:
DHCP (Dynamic Host Configuration Protocol)
By default the phone attempts to contact a DHCP server in your network in order to
obtain its valid network settings, e.g. IP address, subnet mask, gateway, DNS server.
Note
If your network does not use DHCP , proceed to
You can view the system status of your phone via phone user interface or web user
interface.
Available information of phone status includes:
General status including IP address, MAC address and firmware version.

Network status including WAN type and other information.

Phone status including model, hardware, firmware version, product ID and MAC

address.
Accounts status indicating the register status of SIP accounts.

To view the phone status via phone user interface:
1. Press , or tap ->Status.

Basic Network Settings

Getting Started
on page 14.
13