Yealink VP530 User Manual page 22

User Guide for VP530 IP Video Phone
the Internet port in your network or the switch/hub device port.
Power over Ethernet
Using a regular Ethernet cable, the VP530 IP video phone can be powered from a PoE
(IEEE 802.3af) compliant switch or hub.
To connect the PoE:
1. Connect the Ethernet cable between the Internet port on the phone and an
available port on the in-line power switch/hub.
Note
If in-line power is provided, you don't need to connect the AC adapter. Make sure the
Ethernet cable and switch/hub is PoE compliant.
The phone can also share the network with other network device such as a PC (personal
computer). It is an optional connection.
Important! Do not unplug or remove the power to the phone while it is updating firmware
and configurations.
12