Yealink VP530 User Manual page 54

User Guide for VP530 IP Video Phone
Time Out for Dial-now Rule
You can configure the interval for dial-now rules. That is, you can configure your phone
to dial out the phone number, which matches a dial-now rule, in a fixed time.
To configure the timeout for dial-now rule via web user interface:
1. Click on Phone->Features.
2. Enter the time within 0-14 (in seconds) in the Time Out for Dial-now Rule field.
3. Click Confirm to accept the change.
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in a country. This feature is necessary only when dialing outside the
code area. For example, area code is configured as "Code: 011, Min Length: 4, Max
Length: 11", then when you dial out the number "56789", the phone will add the area
code and dial out the number "01156789".
To configure the area code and lengths via web user interface:
1. Click on Phone->Dial Plan->Area Code.
2. Enter the desired values in the Code, Min Length and Max Length fields.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Confirm to accept the change.
Note
The default values of minimum and maximum length are 1 and 15 respectively.
You can block the dialing of specific numbers. When you dial a block out number on
your phone, the dialing will fail and the LCD screen will prompt "Forbidden Number".
You can configure 10 block out numbers for the phone.
To add a block out number via web user interface:
1. Click on Phone->Dial Plan->Block Out.
2. Enter the desired value in the Block Out Number field.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Confirm to add the block out numbers.
44