Yealink VP530 User Manual page 21

If your phone is already installed, proceed to
This section introduces how to install the phone with the components in the packing list:
Connect the Handset and optional Headset

Connect the Network and Power

1) Connect the Handset and optional Headset:
Note
A headset is not provided in the packing list. Contact your system administrator for more
information.
2) Connect the Network and Power:
You have two options for power and network connections. Your system administrator will
advise you which one to use.
AC power

Power over Ethernet (PoE)

AC Power
To connect the AC power:
1. Connect the DC plug on the power adapter to the DC5V port on the phone and
connect the other end of the power adapter into an electrical power outlet.
2. Connect the supplied Ethernet cable between the Internet port on the phone and
Phone Initialization on page 13.
Getting Started
11