Yealink VP530 User Manual page 59

2. Enter the desired number using the keypad.
You can tap
3. Press
You can tap the desired number from the list to dial out directly.
By default, the # key is set as a send key. You can set the * key as send key or set neither
of them as send keys. For more information, refer to the
Note
You can also dial using the SIP URI or IP address. To obtain the IP address of your phone,
press the OK key. For example, 192.168.1.15, sip:2210@sip.com. The maximum SIP URI or
IP address length is 32 characters.
Your phone may not support direct IP dialing. Contact your system administrator for more
information.
To place a call using the hands-free speakerphone mode:
Do one of the following:
- With the handset on-hook, press
Enter the desired number using the keypad.
Press
With the handset on-hook, enter the desired number using the keypad.
-
Press
To place a call using the headset:
Do one of the following:
With an optional headset connected.
-
Tap the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
With an optional headset connected.
-
to open the soft keypad.
, , or the Send soft key.
, , or the Send soft key.
, , , or the Send soft key.
, , or the Send soft key.
Key as Send
or tap the line key to obtain a dial tone.
Basic Call Features
on page 21.
49