Idle Screen - Yealink VP530 User Manual

Hide thumbs Also See for Yealink VP530:

Table of Contents

Tap the pull-down list of Type and then select Static IP.

Enter the parameters IP , subnet mask, gateway, primary DNS, second DNS in the

corresponding fields.

Press the Save soft key to accept the change or the Back soft key to cancel.

Tap

to return to the idle screen.

Note

Using the wrong network parameters may result in inaccessibility of your phone and may

also have an impact on your network performance. For more information about these

parameters, contact your system administrator.

Generally, your phone will be deployed with multiple other phones. In this case, your

system administrator will configure the phone parameters beforehand, so that after you

start up your phone, the phone will be registered and ready to use. If your phone is not

registered, you may have to register it. For more information on how to register your

phone, refer to

If the phone has successfully started up, the idle screen will appear on the phone LCD

screen as shown below:

Account Management

on page 39.

Getting Started

Table of Contents