Network Conference - Yealink VP530 User Manual

User Guide for VP530 IP Video Phone
You can use network conference feature on the VP530 IP video phone to conduct a
conference with multiple participants.
This feature allows you to perform the followings:
Join two calls together into a conference call.

Invite another party into an active conference call.

To use this feature, contact your system administrator for the network conference-URI in
advance, and configure the phone via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select Network from the pull-down list of Conference Type.
5. Enter the conference URI (e.g. conference@example.com) in the Conference URI
field.
6. Click Confirm to accept the change.
To set up a network conference call:
1. Place a call to the first party.
2. Press the Conference soft key to create a new call.
The active call is placed on hold.
3. Enter the number of the second party and press
4. When the second party answers the call, press the Conference soft key to add the
second party to the conference.
5. Press the Conference soft key to create a new call.
The conference is placed on hold.
6. Enter the number of the new party and then press
7. When the new party answers the call, press the Conference soft key to add the new
party to the conference.
8. Repeat steps 5 to 7 until you have added all intended parties.
The procedures to set up a network conference call for specific servers may be different
from introduced above. Contact your system administrator for more information.
60
, , or the Send soft key.
, , or the Send soft key.