Yealink VP530 User Manual page 53

3. Enter the string (e.g. 12345) in the Replace field.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Add to add the replace rule.
When you enter the number "234" using the keypad and then dial out, the phone
will dial out "12345" instead.
Note
The valid value of Account field can be one or more digits among 1, 2, 3, and 4. Each
digit must be separated by a ",". For example: when you enter the value "1, 2" in the
Account field, this replace rule will apply to account1 and account2.
If you leave the Account field blank or enter an invalid value, then the replace rule will
apply to all accounts on the phone.
To edit a replace rule via web user interface:
1. Click on Phone->Dial Plan->Replace Rule.
2. Click the desired replace rule.
3. Edit the values in the Prefix and Replace fields.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Edit to accept the change.
To delete one or more replace rules via web user interface:
1. Click on Phone->Dial Plan->Replace Rule.
2. Select one or more replace rules by checking the check box(es).
3. Click Del to delete the replace rule(s).
You can configure one or more dial-now rules on your phone. When the dialed out
number matches the dial-now string, the number will be dialed out automatically. For
example, a dial-now rule is configured as "2xx", then entering any three-digit string
begins with 2 will be dialed out automatically on the phone.
To add a dial-now rule via web user interface:
1. Click on Phone->Dial Plan->Dial-now.
2. Enter the desired value (e.g. 1234) in the Dial-now Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Add to add the dial-now rule.
When you enter the number "1234" using the keypad, the phone will dial out "1234"
automatically without pressing any key.
Note
You can also edit or delete the dial-now rule, refer to
information.
Customizing Your Phone
Replace Rule on page 42 for more
43