Vauxhall VECTRA Owner's Manual page 94

Using the belts
Fitting seat bel ts
Pull the belt out of the retractor and guide
it across the body , making certain that it is
not twisted.
Insert the la tch plate into the buckle. The
front sea t b ackrest must not be tilted back
too far or the seat belt will not op erate
properly . The recommended angle of
inclina tion is 25° . Mak e sure that the lap
belt is not twisted and that it fits snugly
across the body. Tension the belt
frequently while d riv ing by tugging the
diagonal pa rt of the belt.
92
O n pregnant women in particular, the
lap belt must be positioned as low as
possible ac ross the pelv is so as not to put
too much pressure on the abdomen.
Bulk y clothing prevents the belt from fitting
prop erly. The belt must not rest against
ha rd or fragile objects in the pockets of
your clothing (e.g. ballpoint pens, keys,
spectacles) because these could cause
injury. Do not place any objec ts (e.g.
ha ndb ags, mobile phones) b etween the
belt and your body.
Height adjustm ent
of seat belt upper anchora ge p oint:
1. Pull b elt out slig htly.
2. Front seat b elts: Press button down or
slide belt guide up.
Rear seat belts: Press belt guide and
slide it upwards or downwards.
3. Set desired height.
4. Allow anchorage to lock aud ibly into
position.
Do not adjust height while driving .