Vauxhall VECTRA Owner's Manual page 244

10. Align and refit wheel trim or w heel bolt
caps 3.
Before refitting the wheel cover clean
the wheel around the retaining clips.
Valv e symbol 3 on back of wheel cover
must point towards v alve on wheel.
Alloy wheels 3: align a nd refit wheel
bolt caps 3.
242
11. S tow away replaced wheel, tools and
wa rning triangle in the luggage
com partment.
12. H ave the tightening torque of the wheel
bolts on the new wheel checked on the
v ehicle using a torque wrench as soon
as possible and, if nec essary , c orrected.
Tightening torque – see page 290.
13. Replace the faulty ty re on the wheel
that wa s removed.
14. Replace tem pora ry spare wheel 3 with
a full specifica tion wheel w ithout delay.
Electrical sys tem
Electronic ignition system s generate very
hig h voltages. Do not touch the ignition
sy stem; high voltage can b e fatal.
Fuses
There are three fuse boxes in the v ehicle: in
the pa ssenger com partment on the far left
of the dashboard, in the luggage com part-
ment on the left in the stow age compart-
ment, and in the engine compartment front
left.