Vauxhall VECTRA Owner's Manual page 227

Remove the sealing plug from the hole for
the c oupling ba ll bar. S tow both parts in
the lugga ge c om partment.
Check ing the tensioning of the coupling
ball bar:
Lever 1 m ust not protrude from the
housing.
Otherwise, the coupling ball bar must be
tensioned before it is inserted into the
coupling housing:
Push lever 1 to the left with left hand, at the
sam e time pushing lever 2 forwa rd s – see
diagram.
Inserting the coupling b all bar:
Insert the coup ling ball bar into the
coupling housing by apply ing slight
pressure and allow it to engage in position.
It will loc k automatically and loud ly.
Fit the protective c ap to levers 1 and 2 and
eng age. If it does not engage, re-tension
the coupling ball bar and repeat the fitting
procedure. I f necessary, consult a
workshop. We recom mend tha t you consult
a Vauxhall Authorised Rep airer.
6
225