Replacing A Fuse - Yamaha PZ50FXW Owner's Manual

ESU05590

Replacing a fuse

WARNING
@
Be sure to use the specified fuse. A wrong fuse
could cause electrical system damage or A FIRE
HAZARD.
@
CAUTION :
@
Be sure to turn the main switch off and disconnect
the negative battery lead to prevent accidental short-
circuiting.
@
1. Remove the right side cover. (See pages 8-6–8-9 for
removal procedures.)
2. Disconnect the negative battery lead.
3. Replace the blown fuse with one of the proper
amperage.
Specified fuses:
1 Main fuse:
2 Fuel injection system fuse:
3 "HEAD" (Headlight) fuse:
4 "SIG" (Signal) fuse:
5 "DC TERM" (Auxiliary DC jack) fuse:
6 "IGN" (Ignition) fuse:
7 "FAN" (Radiator fan) fuse:
8 "GEAR" (Electric shift reverse system) fuse: 4 A
9 Spare fuses (20 A, 15 A, 10 A, 7.5 A, 4 A, 3 A)
4. Connect the negative battery lead.
5. Install the right side cover.
NOTE:
@
If the fuse immediately blows again, ask a Yamaha
dealer to inspect the snowmobile.
@
8-35
40 A
10 A
20 A
7.5 A
3 A
20 A
15 A