Speedometer Unit - Yamaha PZ50FXW Owner's Manual

ESU05470

Speedometer unit

The speedometer unit is equipped with the following:
G a digital speedometer (which shows the riding speed)
G an odometer (which shows the total distance trav-
eled)
G
a tripmeter (which shows the distance traveled since
it was last set to zero)
G an engine speed meter (which shows the engine
speed; not for use while riding)
G warning indicators (which show self-diagnosis, cool-
ant temperature, fuel level, and oil level warnings)
G
indicator lights (which show high beam, low coolant
temperature, transmission position, and knock control
system conditions)
G a warning light (which shows warnings together with
the warning indicators)
G
a fuel meter (which shows the fuel remaining in the
fuel tank)
G a grip/thumb warmer level indicator (which shows the
grip warmer or the thumb warmer level)
After the main switch is turned on, the warning light 1,
the low coolant temperature indicator light 2, the knock
control system "KCS" indicator light 3, the drive "D" indi-
cator light 4, the reverse "R" indicator light 5, and all
segments of the meter display 6 turn on and off once.
The grip warmer level is initially displayed for 5 seconds,
then the display switches to the fuel meter.
Odometer, tripmeter, and engine speed meter modes
Pushing the "SELECT" button 1 switches the display
between the odometer mode "ODO", tripmeter mode
"TRIP", and engine speed meter mode "r/min".
To reset the tripmeter, push the "RESET" button 2 for at
least 1 second while the tripmeter is displayed.
5-4