Checking The Drive Chain Housing Oil Level And The Drive Chain Tension - Yamaha PZ50FXW Owner's Manual

7. Rotate the secondary sliding sheave clockwise 4
and push 5 it so that it separates from the secondary
fixed sheave.
8. Install the V-belt 6 between the secondary sliding
and secondary fixed sheaves.
9. Install the drive guard.
10. Install the left side cover (for PZ50FX/PZ50GT/
PZ50M), or install the left side cover and the left
upper cover, and then close the shroud (for PZ50VT).
WARNING
@
Never run the engine with the V-belt or drive guard
removed.
@
ESU05640
Checking the drive chain housing oil level and
the drive chain tension
Checking the oil level
WARNING
@
The engine, oil tank, brake disc, and coolant hoses
will be very hot after the engine has been run. Avoid
contact while they are still hot with any part of your
body or clothing during inspection or repair.
@
1. Place the snowmobile on a level surface.
2. Remove the right side cover. (See pages 8-6–8-9 for
removal procedures.)
3. Remove the dipstick 1, wipe it off with a clean rag,
and then insert it back into the filler hole.
8-18