Yamaha PZ50FXW Owner's Manual page 78

CAUTION :
@
The left and right ski spring preload must be set to
the same pressure. Uneven settings can cause poor
handling and loss of stability.
@
WARNING
@
This shock absorber contains highly pressurized
nitrogen gas. It could explode by improper handling,
causing injury, or property damage.
G Do not tamper with or attempt to open the shock
absorber.
G Do not subject the shock absorber to an open
flame or other high heat source, which could
cause it to explode.
G
Do not deform or damage the shock absorber in
any way.
G Do not dispose of a worn or damaged shock
absorber by yourself. Take the unit to a Yamaha
dealer.
@
ESU04750
Adjusting the ski damping forces
For PZ50FX
Compression damping force
The compression damping force of each ski shock
absorber can be adjusted by turning the compression
damping force adjusting knob 1.
CD-28E
Adjusting knob
position
Damping
∗ With the adjuster fully turned in direction a
8-23
12 clicks 7 clicks
out out
Minimum Standard
∗
Turns out b
Soft
2 clicks
out
Maximum
Turns in a
Hard