Yamaha PZ50FXW Owner's Manual page 77

ESU03851
Adjusting the ski spring preload
The spring preload can be adjusted by turning the spring
preload adjuster 1.
For PZ50M/PZ50VT
CD-10E
Spring adjuster position
Preload
Standard
CAUTION :
@
The left and right ski spring preload must be set to
the same pressure. Uneven settings can cause poor
handling and loss of stability.
@
For PZ50FX
CD-11E
Spring seat length*
Preload
a Length
∗ The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
For PZ50GT
CD-11E
Spring seat length*
Preload
a Length
∗ The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
8-22
5 4
2 Hard
Standard
Increased ←
←
Harder
Maximum
129.0 mm 119.0 mm
(5.08 in) (4.69 in)
Standard
Increased ←
←
Harder
Maximum
160.5 mm 150.5 mm
(6.32 in) (5.93 in)
3 2 1
Soft 3
1
→ Decreased
→
Softer
Minimum
119.0 mm
(4.69 in)
→ Decreased
→
Softer
Minimum
150.5 mm
(5.93 in)