Yamaha PZ50FXW Owner's Manual page 83

WARNING
@
Never adjust the control rods beyond the maximum
range indicated on the rods with red paint 3.
@
c Adjustable range
d Standard position
ESU04342
Adjusting the 2-up adjusting block spring force
For PZ50VT
The spring force can be adjusted by changing the posi-
tion of the 2-up adjusting blocks.
NOTE:
@
Be sure to make this adjustment when there is no load
(rider or cargo) on the snowmobile.
@
1. Install the special tools 1 and 2 included in the
owner's tool kit to the 2-up adjusting block 3.
2. Pull the lock lever 4 and turn the special tool 2 to
change the block position.
3. Release the lock lever.
CAUTION :
@
Make sure that the 2-up adjusting blocks are
installed in the same position on both sides of the
snowmobile.
@
a 2-up position (rider and passenger)
b Solo rider position
8-28