ESU05450
Backrest
For PZ50VT
The backrest is adjustable.
1. Open the backrest zipper and loosen the backrest
bolts 1.
2. Adjust the backrest angle to the desired position.
3. Tighten the bolts and close the zipper.
Backrest bolt tightening torque:
19 Nm (1.9 m·kgf, 14 ft·lb)
WARNING
@
Do not sit on the backrest.
@
ESU02422
Storage compartment
For PZ50FX/PZ50GT/PZ50M
Open the storage compartment to store the tool kit,
spare parts, or other small items.
ESU05020
Rear carrier
For PZ50VT
The rear carrier is located at the rear of the snowmobile.
1 Rear carrier
Maximum load limit: 20 kg (44 lb)
WARNING
@
Do not use the rear carrier to lift the snowmobile.
The snowmobile could fall, which could result in
severe injury or death.
@
5-15