Brake Fluid Leakage; V-Belt - Yamaha PZ50FXW Owner's Manual

ESU00093

Brake fluid leakage

Apply the brake for a few minutes. Check to see if any
brake fluid leaks out from the brake hose joints or the
master cylinder.
WARNING
@
If brake fluid leakage is found, ask a Yamaha dealer
for immediate repairs.
@
CAUTION :
@
Brake fluid may deteriorate painted surfaces or plas-
tic parts. Never spill any brake fluid. If any is spilled,
clean it up immediately.
@
ESU05500

V-belt

Check the V-belt.
1. Remove the left side cover (for PZ50FX/PZ50GT/
PZ50M), or open the shroud and remove the left
upper cover and the left side cover (for PZ50VT).
(See pages 8-6–8-9 for removal procedure.)
2. Remove the drive guard.
3. Check the V-belt for wear and damage. Replace if
necessary.
Wear limit a: 32.5 mm (1.28 in)
4. Install the drive guard.
5. Install the left side cover (for PZ50FX/PZ50GT/
PZ50M), or install the left side cover and the left
upper cover, and then close the shroud (for PZ50VT).
WARNING
@
G
Make sure that the drive guard is installed
securely before operating the snowmobile.
G
Never run the engine with the V-belt or drive
guard removed.
@
6-7