Drive Guard; Drive Track; 51-Mm (2.0-In) High-Profile Pattern Drive Track - Yamaha PZ50FXW Owner's Manual

ESU00096

Drive guard

Check the drive guard mounts for damage. Make sure
that the drive guard is firmly in place.
ESU00097

Drive track

Check the drive track for deflection, wear, or damage.
Adjust or replace if necessary. (See pages 8-29–8-31 for
more details.)
WARNING
@
Do not operate the snowmobile if you find damage to
the drive track, or if it has been maladjusted. Drive
track damage or failure could result in loss of brak-
ing ability and snowmobile control, which could
cause an accident.
@
ESU02430

51-mm (2.0-in) high-profile pattern drive track

For PZ50M
This snowmobile is originally equipped with a 51-mm
(2.0-in) high-profile pattern drive track specifically for use
in deep snow riding conditions.
Therefore, avoid prolonged operation on hard surfaces
such as ice, hard-packed snow, dirt, etc., to extend the
life of the track and slide runners.
CAUTION :
@
G Only use in deep snow riding conditions.
G
Operation on areas with light snowfall, ice, hard-
packed snow, dirt, or grass will result in rapid
wear or damage to the track and slide runners
from lack of snow which serves as a lubricant.
@
6-8