Checking The Drive Chain Housing Oil Level And The Drive Chain Tension - Yamaha RX10K Owner's Manual

Hide thumbs Also See for RX10K:
Table of Contents

Advertisement

8. Install the V-belt over the primary sheave assembly.
9. Rotate the secondary sliding sheave clockwise 6
and push 7 it so that it separates from the secondary
fixed sheave.
10. Install the V-belt 8 between the secondary sliding
and secondary fixed sheaves.
11. Install the drive guard.
WARNING
@
Never run the engine with the V-belt or drive guard
removed.
@
ESU03511
Checking the drive chain housing oil level and
the drive chain tension
Oil level check
WARNING
@
The engine, oil tank, brake disc, and coolant hoses
will be very hot after the engine has been run. Avoid
contact while they are still hot with any part of your
body or clothing during inspection or repair.
@
1. Place the snowmobile on a level surface.
2. Remove the dipstick 1 and wipe it off with a clean
rag. Then put the dipstick in the hole.
8-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx10mkRx10mskRxw10kRxw10skRx10rkRx10rsk

Table of Contents