RST9N
1. Passenger grip warmer switch
2. Off
3. "HI" (high)
4. "LO" (low)
RST1NTF / RST1NTFY
1
1. Passenger grip warmer switch
2. Off
3. "HI" (high)
4. "LO" (low)
ESU14051
Passenger footrests
The passenger footrests can be installed in
two
(RST9N)
RST1NTFY) different positions to suit the
passenger's preference.
To change the position of a footrest, remove
the screws, place the footrest in the desired
position, and then install and tighten the
screws.
4
2
or
three
(RST1NTF /
2
1. Footrest
2. Screw
ECS00132
NOTICE
Make sure that the screws are tightened
securely after changing the position of
the footrests.
Do not overtighten the screws, other-
wise the footrest may be damaged.
ESU14131
Backrest
EWS00132
WARNING
3
Do not sit on the backrest. Otherwise, you
could lose your balance, fall, and be in-
jured.
The
angle
RST1NTFY) of the backrest are adjustable.
To adjust the backrest angle
Turn the backrest adjusting knob until the
backrest reaches the desired angle.
Control functions
and
position
1
(RST1NTF /
29