Multi-Function Meter Unit - Yamaha FX Nytro FX10A Owner's Manual

Control functions
TIP
If the T.O.R.S. is activated, the warning light
and engine trouble warning indicator will
flash, and the two-digit code "84" will flash in
the meter display. If this occurs, have a
Yamaha dealer check the system as soon as
possible.
1. Warning light "
2. Engine trouble warning indicator "
3. Two-digit code "84"
ESU12725

Multi-function meter unit

The multi-function meter unit is equipped with
the following:
a digital speedometer
G
an odometer
G
a tripmeter (which shows the distance trav-
G
eled since it was last set to zero)
an engine speed meter (which shows the
G
engine speed; not for use while riding)
warning indicators (which show engine
G
trouble, coolant temperature, fuel level, and
oil level warnings)
indicator lights (which show high beam and
G
low coolant temperature conditions)
a warning light (which shows warnings to-
G
gether with the warning indicators)
a fuel meter (which shows the fuel remain-
G
ing in the fuel tank)
a grip/thumb warmer level indicator (which
G
shows the grip warmer or the thumb warm-
er level)
10
"
"
When the key is turned to the on position, the
warning light, the low coolant temperature in-
dicator light, and all segments of the meter
display come on and go off.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
7
6
1. Meter display
2. Warning indicators
3. High beam indicator light "
4. Low coolant temperature indicator
light " "
5. Warning light "
6. "RESET" button
7. "SELECT" button
Odometer, tripmeter, and engine
speed meter modes
1. Odometer/tripmeter/engine speed meter
Pushing the "SELECT" button switches the
display between the odometer mode "ODO",
tripmeter mode "TRIP", and engine speed
meter mode "r/min" in the following order:
ODO → TRIP → r/min → ODO
1
5 4 3
"
"
2
1