Blocking Reception Of Unwanted Faxes - Sharp UX-84 Operation Manual

all-UX84H.book Page 101 Wednesday, July 5, 2000 8:48 AM
Downloaded from: http://www.usersmanualguide.com/

Blocking Reception of Unwanted Faxes

The Anti Junk Fax function allows you to block reception of faxes
from parties which you specify. This saves paper by not printing out
unwanted "junk" faxes.
To use this function, enter the fax numbers from which you do not
want to receive faxes as shown below.
♦ Up to five numbers can be entered in the Anti Junk Number List.
♦ To clear a number from the Anti Junk Number List, you need to
know the 1-digit number which identifies it. If you have forgotten
this number, print out the Anti Junk Number List as explained in
Chapter 8.
♦ For blocking faxes you must have either the telephone number as
programmed into the transmitting machine or, if Caller-ID is
enabled, the telephone number of the calling party.
1
Press these keys:
The display will show:
ENTRY MODE
2
Press the * * * * key twice.
The display will show:
STORE JUNK #
1=SET,2=CLEAR
Blocking Reception of Unwanted Faxes
FUNCTION
3
101