Using The Radf - Sharp SF-2052 Operation Manual

SORTER ORIGINAL TO COPY
1 1
SORT
(ORIGINALS)
EVEN NUMBER
ODD NUMBER
STAPLE
2
SORT
2
GROUP
PRE-COUNT
ORIGINALS
PROGRAM
P 1 2 3
CLEAR ALL
CA 4 5 6
7 8 9
INTERRUPT
AUDIT CLEAR
0/ C
3
START
6
9
C
2 Ensure that the 1-sided to 1-sided copying mode is
selected in the ORIGINAL TO COPY section of the
2
operation panel.
When no indicator in the ORIGINAL TO COPY section is lit,
2
the 1-sided to 1-sided copying mode is selected.
1 1
Use the 10-key pad to enter the desired number of
3
copies.
The number will be shown in the copy quantity display.
Use the clear (
START
been made.
4 Press the START key.
To cancel a copy run, press the clear (
stop and the RADF will output any originals which have been
fed. Also, the number in the copy quantity display will be reset
to 0.
2-sided copies from 1-sided originals
Adjust the original guides to the size of the originals
1
and set the originals face up in the document feeder
tray.

USING THE RADF

) key to cancel an entry if a mistake has
) key. Copying will
9