Using The Sorter - Sharp SF-2052 Operation Manual

20-BIN SORTER (SF-S16)

Using the sorter

SORT
SORT
(ORIGINALS)
EVEN NUMBER
ODD NUMBER
STAPLE
SORT
GROUP
SORT
(ORIGINALS)
EVEN NUMBER
ODD NUMBER
STAPLE
SORT
GROUP
SORT
(ORIGINALS)
EVEN NUMBER
ODD NUMBER
STAPLE
SORT
GROUP
78
Press the SORTER key to select the desired mode.
GROUP
(The STAPLE SORT mode cannot be selected for the SF-
S16.)
To cancel the mode, press the SORTER key until the SORT,
STAPLE SORT, and GROUP indicators all go out.
2
NON-SORT
1 1
When neither of the two available sorter modes, SORT or GROUP is
2
2
selected, the copier is in the NON-SORT mode. In this mode, all
1 1
2 copies will be deposited in the top bin of the sorter.
PRE-COUNT
Be sure to use the NON-SORT mode when copying onto special
ORIGINALS
papers such as transparency film or label stock.
2
SORT
1 1
Press the SORTER key to select the SORT mode.
2
2
1 1
2
SORT is used for automatic copy collating. Copies of each original
PRE-COUNT
will be sequentially deposited in the sort bins.
ORIGINALS
2
GROUP
1 1
Press the SORTER key to select the GROUP mode.
2
2
1 1
2
In the GROUP mode, all copies of the same original will be
PRE-COUNT
deposited in the same bin.
ORIGINALS