Sharp SF-2052 Operation Manual page 124

KEY OPERATOR PROGRAMS
P47 Stream Feeding Mode
Program P47 is used to enable the stream feeding mode of the
document feeder. When the stream feeding mode is enabled, additional
originals which are set in the document feeder tray within 5 seconds
after the previous original was fed will be fed and copied automatically.
When P47 is entered, the following message will appear.
P50 Staple Position Setting
Program P50 is used to select the initial stapling position for an
optional 20-bin staple sorter (SF-S55N).
When P50 is entered, the following message will appear.
122
P47: STREAM FEEDING MODE (DOCUMENT
FEEDER).
1.YES
To enable the stream feeding mode, press key 1.
To disable the stream feeding mode, press key 2.
P50: STAPLE POSITION SETTING.
USE 10-KEY PAD TO SELECT.
A4
A3 B4
A4R
CORNER
:PRESS 1
Select the desired stapling position using the 10-key pad.
2.NO
A4 A4R
A3 B4
TWO STAPLE ONE STAPLE
:PRESS 2 :PRESS 3