Sharp SF-2052 Operation Manual page 48

INSERTS JOB MEMORY
1 2
4 5
7 8
AUDIT CLEAR
0/
C
1 2
4 5
8
7
AUDIT CLEAR
0/
C
3
START
6
9
C
MATION
PROGRAM
P
CLEAR ALL
CA
1 2
4 5
8
7
AUDIT CLEAR
0/
C
46
Deleting a stored job program
1 Follow steps 1 and 2 in "Storing a job program" on the
3
previous page. (1. Press the PROGRAM key. 2. Press
the 0 key.)
6
Press key 2 on the 10-key pad.
2
9
The following message will appear.
TO DELETE A PROGRAM FROM THE STORAGE
REGISTER: PRESS ANY KEY FROM 1 TO 9
AND THEN THE START KEY.
3 Enter the storage register number of the program to be
3
deleted.
To exit the job memory mode without deleting a program,
6
press the CLEAR ALL (
9
4 Press the START key.
The program will be deleted from memory.
Recalling a job program
1 Press the PROGRAM key.
1 The following message will appear.
TO RECALL A PROGRAM, PRESS PROGRAM
NUMBER: 1,2,3,4,5,6,7,8,9
4
TO STORE OR DELETE PROGRAMS, PRESS 0.
The numbers which appear in the display are program
numbers which have been used.
2 Use the 10-key pad to select a stored program from 1 to
3
9.
All selections stored in the program will be reflected on the
6
operation panel.
The recalled settings may be modified for a particular job run,
9
but any changes made will not be stored in the job memory. To
store the new settings, follow the "Storing a job program"
procedure.
) key.