Sharp SF-2052 Operation Manual page 125

P51 Auto Front Access Mode Setting
Program P51 is used to enable or disable the automatic front access
mode for each of the SORT, STAPLE SORT, and GROUP modes
when an optional 20-bin staple sorter (SF-S55N) is installed. If this
mode is enabled and A4 or 8-1/2" x 11" paper is used, the copies
delivered into the sort bins will automatically move toward the front
side of the staple sorter after copying is completed, so that copies
can be easily taken out.
When P51 is entered, the following message will appear.
P52 Override Sorter Bin Capacity Limit
Program P52 is used to control operation in case of bin capacity
overflow of an optional staple sorter (SF-S53N or SF-S55N). If the
control is cancelled, copying in the STAPLE SORT mode can be
started even if copies remain in a sort bin. Also, copying can be
continued even if the number of copies in a sort bin exceeds the limit,
though copies will not be stapled.
When P52 is entered, the following message will appear.
KEY OPERATOR PROGRAMS
P51: AUTO FRONT ACCESS MODE SETTING.
(STAPLE SORTER)
SORT
1.YES
GROUP
1.YES
STAPLE SORT
1.YES
Enable or disable the automatic front access mode for the
SORT, GROUP, and STAPLE SORT modes using the 10-key
pad.
P52: OVERRIDE SORTER BIN CAPACITY
LIMIT. (STAPLE SORTER)
1.YES
To cancel the control, press key 1.
To restore the control, press key 2.
2.NO
2.NO
2.NO
2.NO
123