Copying From The Document Glass - Sharp SF-2052 Operation Manual

Electrostatic copying machine
Table of Contents

Advertisement

COPYING FROM THE DOCUMENT GLASS

Use the document glass for copying single originals, bound
documents, and other originals that cannot be set in the RADF.
Duplex copying will not work when a non-standard sized paper is
used.
2-sided to 2-sided or 2-sided to 1-sided cannot be selected when
copying from the document glass. These operations, however,
can be performed by manually turning over the originals.
Image void can occur at the leading edge (max. 3 mm (1/8")) and
the trailing edge (max. 4 mm (5/32")) of the copies.
ORIGINAL TO COPY
SORTER
1
SORT
(ORIGINALS)
EVEN NUMBER
ODD NUMBER
STAPLE
2
SORT
2
GROUP
PRE-COUNT
ORIGINALS
ORIGINAL
A4
A4R
AUTO PAPER
SELECT
1.
A4
2. A4R
3. A3
1
2
3
4
5
6
8
7
9
AUDIT CLEAR
0/
C
12
1-sided copies of 1-sided originals
1
Open the document feeder cover and place an original
face down on the document glass, using the centring
scale to position it.
Original
NOTE:
size
detector
Do not place objects under the original size detector, because
they may damage it.
2
Close the document feeder cover.
The original size will be detected and indicated in the message
display.
3
Ensure that 1-sided to 1-sided is selected on the
ORIGINAL TO COPY section of the operation panel.
2
1
When no indicator in the ORIGINAL TO COPY section is lit,
the 1-sided to 1-sided copying mode is selected.
2
1
1
4
Ensure that the desired paper tray is selected.
INFORMATION
Paper matching the size of the original will be automatically
selected when the auto paper select function is enabled. To
copy onto paper of a different size, press the TRAY SELECT
key.
The auto paper select function can be disabled using a key
operator program. If this function is disabled, use the TRAY
TRAY SELECT
SELECT key to select the desired paper tray.
KEY OPERATOR
paper selection.
Use the 10-key pad to enter the desired number of
5
copies.
The number will be shown in the copy quantity display.
START
Use the clear (
made.
6
Press the START key.
The number in the copy quantity display will decrease by 1
each time a copy is made.
See page 124 to enable or disable the auto
) key to cancel an entry if a mistake is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents