Storing Sms Message Centre Numbers; Sending A Message - Panasonic KX-FC238FX Operating Instructions Manual

Compact plain paper fax with dect
Table of Contents

Advertisement

4.11.2 With the base unit
1
Press {MENU}.
2
Press {#}, then {5}{3}.
3
Press {A} or {B} repeatedly to select "ON"
or "OFF" (default).
4
Press {SET}.
5
Press {MENU}.
Note:
L If you try to send a message while SMS is
turned OFF, a tone sounds and the message
is placed in the receive list with "FD"
attached to it.
L If someone tries to send you a message
while SMS is turned OFF, the message will
not be received and the message centre
number will be logged in the Caller ID list.
4.12 Storing SMS
message centre numbers
SMS message centre telephone numbers must
be stored in order to send and receive SMS
messages.
L Keep the front cover page open for button
locations.
L Consult your service provider for more
information.
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Settings", then press {>}.
4
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 79).
5
Select "Message Centre1" or "Message
Centre2", then press {>}.
6
Edit the number as necessary, then press
{j/OK}.
7
Select "Save", then press {>}.
8
Press {ih}.
Note:
L If your phone is connected to a PBX, you
need to add the PBX line access number and
a dialling pause to the beginning of the
Message Centre 1 phone number.

4.13 Sending a message

{k}
{>}{e}{v}
4.13.1 Writing and sending a new
message
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Create", then press {>}.
L If "^Use Last Text?" is displayed, you
can use the text from the last message
you created by pressing {e}.
4
Enter the message (page 43), then press
{j/OK}.
5
Enter the destination telephone number.
Manually:
Enter the number, up to 20 digits.
Using the handset phonebook:
1. Press {k}.
2. Press {e} or {v} repeatedly to display
the desired item.
L You can also find an item using one of
the search methods on page 30.
3. Press {j/OK}.
Using the Caller ID list:
1. Press {e} or {v} repeatedly to select
the party.
2. Press {j/OK}.
Using the redial list:
1. Press {R} repeatedly to select the
telephone number.
2. Press {j/OK}.
6
Press {j/OK}.
7
To save the message, select "Yes", then
press {>}.
4. Telephone
{j/OK}
{R}
{ih}
{C/ T }
39

Advertisement

Table of Contents
loading

Table of Contents