Table of Contents
Advertisement
4
If a name is required, enter the name, up to 16
characters (see page 55 for character entry). i
{j/OK}
5
Enter the telephone number, up to 24 digits. i
{j/OK}
6
"Save" i {>} i {ih}
3.11.2 Into the base unit
1
{CALLER ID}
2
Press {A} or {B} repeatedly to display the desired
item. i {MENU}
3
If a name is required, enter up to 16 characters for
the name (see page 55 for character entry). i
{SET} i {SET}
SMS (Short Message Service)
3.12 Using SMS (Short Message
Service)
SMS allows you to send and receive text messages
between other fixed-line and mobile phones that support
compatible SMS networks and features.
Important:
L To use SMS features, you must:
– subscribe to the Caller ID and/or appropriate
service
– confirm SMS is turned on
– confirm the correct message centre numbers
are stored
Consult your service provider/telephone
company for details and availability.
Note:
L A total of 47 messages (at 160 characters/message)
can be saved. Total number may be more than 47 if
length of messages is less than 160
characters/message.
L If the unit is connected to a PBX system, you may not
be able to use SMS features.
3.13 Turning SMS on/off
1
{j/OK} i "SMS" i {>}
2
"Settings" i {>}
3
"SMS On/Off" i {>}
4
"On" or "Off" i {>} i {ih}
3.14 Storing SMS message centre
numbers
SMS message centre telephone numbers must be
stored in order to send and receive SMS messages.
L Consult your service provider/telephone company for
more information.
1
{j/OK} i "SMS" i {>}
2
"Settings" i {>}
3
"Message Centre1" or "Message Centre2" i
{>}
4
Enter/edit the number as necessary. i {j/OK}
5
"Save" i {>} i {ih}
Note:
L If your phone is connected to a PBX, you need to add
the PBX line access number and a dialling pause to
the beginning of the Message Centre 1 phone
number.
3.15 Sending a message
3.15.1 Writing and sending a new message
1
{j/OK} i "SMS" i {>}
2
"Create" i {>}
3
Enter the message (page 55). i {j/OK}
4
Enter the destination phone number up to 20 digits.
i {j/OK}
L Using the cordless handset phonebook:
{k} i Select the cordless handset
phonebook entry. i {j/OK} 2 times
L Using the caller list:
Press {^} or {V} to select the party. i {j/OK}
2 times
L Using the redial list:
Press {R} repeatedly to select the phone
number. i {j/OK} 2 times
5
To save the message, select "Yes". i {>}
6
To send the message, press {>}.
L To cancel sending, press {ih}.
Note:
L This unit supports SMS messages of up to 612
characters, however, the maximum number of
characters you can send or receive may be limited by
your SMS service provider/telephone company.
Consult your SMS service provider/telephone
company for details.
L If your message contains over 160 characters, the
message is a long message and "@@Long
Message@@" is displayed. Your service
provider/telephone company may treat long
messages differently from other messages. Consult
your service provider/telephone company for details.
L If your phone is connected to a PBX, store the PBX
line access number (page 26).
3.15.2 Sending a saved message
1
{j/OK} i "SMS" i {>}
2
"Send List" i {>}
3
To read a saved message, press {^} or {V}
repeatedly to select the message. i {j/OK}
3. Telephone
25
Advertisement
Table of Contents
