Initial Programming
3.7 Dialling mode
If you cannot dial (page 27, 47), change this
setting depending on your telephone service.
L Change this setting both on the base unit and
on the handset.
3.7.1 With the handset
{j/OK}
{>}
1
Press {j/OK}.
2
Select "Base Unit Setup", then press
{>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 79).
4
Select "Call Options", then press {>}.
5
Select "Dial Mode", then press {>}.
6
Select the desired setting, then press {>}.
– "Tone" (default): For tone dial service.
– "Pulse": For rotary pulse dial service.
7
Press {ih}.
3.7.2 With the base unit
{SET}
{MENU}
{<}{>}{A}{B}
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display
"DIALLING MODE".
3
Press {A} or {B} repeatedly to display the
desired setting.
– "TONE" (default): For tone dial service.
4
5
3.8 Date and time
You must set the date and time for both the
handset and the base unit.
Times are set independently and may not
necessarily be identical.
{ih}
3.8.1 With the handset
Important:
1
2
3
4
5
– "PULSE": For rotary pulse dial service.
Press {SET}.
L The next feature will be displayed.
Press {MENU}.
L The other party's fax machine will print the
date and time on each page you send
according to your base unit's date and time
setting.
L The accuracy of the clock is approximately
±60 seconds a month.
{j/OK}
{<}{>}
L Confirm that the power cord of the base
unit is connected.
L Ensure that w is not flashing.
L If a power failure occurs, set the date and
time for the handset again.
Press {j/OK}.
Select "Handset Setup", then press {>}.
Select "Time Settings", then press {>}.
Select "Set Date & Time", then press
{>}.
L The cursor (|) will appear on the display.
Enter the current date/month/year by
selecting 2 digits for each.
Example: 10 August, 2005
Press {1}{0} {0}{8} {0}{5}.
3. Preparation
{ih}
@
23