Table of Contents
Advertisement
8. Answering Machine
{0} Skip greeting message
L The greeting message is skipped.
{8}{0} Turn OFF auto answer setting
L The receive mode will be changed from
TAM/FAX mode to TEL mode or TEL/FAX
mode depending on the setting of feature #73
(page 69).
L You cannot return to TAM/FAX mode in the
same call.
To turn ON the auto answer setting
1. Call your unit and wait for 20 rings.
L A beep will sound.
2. Enter the remote operation ID (feature #11 on
page 66) within 8 seconds.
L The unit will play the greeting message,
and the auto answer setting will be turned
ON. The receiving mode will be set to
TAM/FAX or FAX ONLY mode, depending
on the setting of feature #77 (page 69).
3. Hang up the handset.
Note:
L You cannot turn ON the auto answer setting
when the unit is set to TEL/FAX mode.
Recording a marker message
After playing back the messages, you can leave
an additional message.
1. Wait for 3 beeps indicating the end of the
remote operation.
2. Hear 1 beep.
3. Wait about 10 seconds.
4. Hear the voice guide or hear 1 beep.
5. Leave a message.
Note:
L If you do not enter a remote command key
within 10 seconds after the last operation, the
unit will ask you to leave a marker message.
64
Advertisement
Table of Contents
