Table of Contents
Advertisement
Greeting
7 Answering Machine
7.1 Recording your greeting
message
The unit has a pre-recorded greeting message for
TAM/FAX mode. If you record your own greeting
message, it will be played instead of the pre-recorded
greeting message when a call is received.
The maximum recording time of your greeting message
is either 16 seconds (default) or 60 seconds. We
recommend you record a message of less than 12
seconds to make it easier to receive faxes.
{RECORD}
{STOP} {MIC}
{SET}
1
Set feature #77 to "TAM/FAX" (page 44)
beforehand.
2
Press {RECORD} 2 times.
3
{SET}
L A long beep will sound.
4
Speak clearly about 20 cm away from {MIC}.
5
To stop recording, press {STOP}.
Note:
L You can change the maximum TAM/FAX greeting
message time to 60 seconds (feature #54 on page
43).
– If you change the setting to 60 seconds, we
recommend that you tell the caller in your
TAM/FAX greeting message to press *9 before
starting the fax transmission.
– If you change the setting from 60 seconds to 16
seconds, your current greeting message will be
deleted. The pre-recorded greeting message will
be played when a call is received.
L If you change the maximum recording time of
incoming messages to "GREETING ONLY" (page
38, feature #10 on page 41), the unit will answer a
call with your current greeting message, and then
hang up. Re-record your greeting message to inform
the caller that the unit will not record any incoming
messages.
To check the greeting message
1. Set feature #77 to "TAM/FAX" (page 44)
beforehand.
2. Press {AUTO ANSWER} repeatedly to display
"TAM/FAX MODE".
{AUTO ANSWER}
{ERASE}
L The unit will play the TAM/FAX greeting message.
7.1.1 Erasing your recorded greeting
message
1
Set feature #77 to "TAM/FAX" (page 44)
beforehand.
2
Press {ERASE} 2 times.
3
{SET}
L To cancel erasing, press {STOP}.
4
{SET}
Note:
L If you erase your TAM/FAX greeting message, the
pre-recorded greeting message will be played when
a call is received.
7. Answering Machine
35
Advertisement
Table of Contents
