Sending A Fax Using The Base Unit Phonebook / One Touch Dial - Panasonic KX-FC966FX Operating Instructions Manual

Thermal fax with dect
Table of Contents

Advertisement

5. Fax
Maximum document size
216 mm
Effective scanning area
L Shaded area will be scanned.
4 mm
208 mm
216 mm
Document weight
L Single sheet: 45 g/m
L Multiple sheets: 60 g/m
Note:
L Remove clips, staples or other fasteners.
L Do not send or copy documents that are on the
following types of paper: (Make a copy of the
document using another copier and send the copy.)
– Chemically treated paper such as carbon or
carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with a faint image
– Paper with printing on the opposite side that can
be seen through the other side, such as
newsprint.
L Check that ink, paste or correction fluid has dried
completely.
L To send a document with a width of less than 210
mm, we recommend using a copy machine to copy
the original document onto A4 or letter-sized paper,
then sending the copied document.
26
2 mm
2 mm
4 mm
2
2
to 90 g/m
2
2
to 80 g/m
5.3 Sending a fax using the base
unit phonebook / one touch dial
Before using this feature, store the desired names and
telephone numbers into the base unit phonebook (page
20) or one touch dial (page 21).
2
{STOP}
{FAX/START}
Station keys
1
Open the document feeder tray (1), then adjust the
width of the document guides (2) to fit the actual
size of the document.
2
Insert the document (up to 10 pages) FACE DOWN
until a single beep is heard and the unit grasps the
document.
L If the document guides are not adjusted to fit the
document, re-adjust them.
3
If necessary, press {A} or {B} repeatedly to select
the desired resolution (page 25).
4
Enter the fax number.
Using one touch dial:
For stations 1–5
Press the desired station key.
For stations 6–10
Press {LOWER}, then press the desired station key.
Using base unit phonebook:
Press {PHONEBOOK}, then {A} or {B} repeatedly
to display the desired item.
5
{FAX/START}
Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number 2 or more times.
L To cancel redialling, press {STOP}.
If your unit does not send a fax
L Confirm that you have entered the number correctly,
and that the number is a fax number.
L Confirm that the other party's fax machine is
answering by turning ON the connecting tone feature
(feature #76 on page 44).
1
{LOWER}
{A}{B}{PHONEBOOK}

Advertisement

Table of Contents
loading

Table of Contents