Using fax functions
To use a program
If a destination has been registered with a program, the
fax number can be dialed simply by touching the
Program key.
If a destination has not been registered with a program,
the destination cannot be specified.
If transmission settings have been registered with the
program, the functions are automatically set.
Only one program can be selected.
%
In the Program Screen, touch the key for the
program that you wish to use.
– Touch [Page List] to select the page of program
destinations to be displayed.
– To cancel the setting, touch the key again to
deselect it.
– To clear all of the selected destinations, press
[Reset].
bizhub 500/420 (Phase 2)
4
4-7